| PurSolid | |
 | Oiling with
AURO PurSolid Hard oil No. 123 impregnates the wood and reduces its absorptive
capacity. It is then effectively protected from soiling and water, but can
still store air moisture. It is given a natural feel and an intensive colour
tone.
|
 | The oil is applied with
a roller or metal blade and distributed in a uniform layer on the sanded floor.
After about 10 minutes, use the single-disc machine and a polishing disc to rub
in all of the excess oil. No shiny surfaces should remain. Then allow to dry
for 24 hours. |
A final application of Hard wax No. 171 results in a thin protective layer that further enhances the wearing qualities, fine appearance and feel of the wood surface. | |
 | Apply the
wax in a very thin layer using a root-ball cloth or polishing machine. Polish
with single-disc machine and polishing pad within one hour. If wax is not to be
used, a second oil application is also effective.
|
 | After a
further 24 hours of drying time you may cautiously begin to use the surfaces.
However, avoid exposure to moisture and mechanical loads during the next 4-6
weeks until the coatings are completely hardened.
|
